A one-piece reinforced concrete Headwall to suit Twin Wall Pipes up to 500mm ID and Pcc Pipes up to 450mm ID. The hole in the back wall is cast rectangular to allow the pipe to enter at an angle of up to 45 Degree and therefore discharge at 45 degrees to the flow.  This unit is available in both left and right hand versions.  Four 10T – 340 Capstan Lifters are cast into the top of the back wall and the apron for lifting and positioning. The toe is cast separately and is available in depths of 300, 600 and 900mm as standard with other sizes made to order. The toe is fixed to the underside of the Headwall with 20mm Dia Stainless Steel Dowels at 600mm centres secured with High Strength non-shrink grout into 75mm Dia Dowel Hole.

If you require any assistance or more information please contact us by phone on 01603 488700 or by email sales@althon.co.uk

XLA RH 25 Headwall line drawing
Product Name
Max Pipe Opening PCC
Max Pipe Opening Plastic / C'ware
Backwall Height
Approx Headwall Weight (kg)
XLA RH 25 Headwall

    All Available Downloads for XLA RH 25 Headwall

    You can select multiple files below to be added to a single zip file, your selections will be retained across different Headwalls

    Add to Zip File

    XLA RH 25 Headwall


    Datasheet and Installation Instructions for XLA RH 25 Headwall

    Free headwall design service

    If you cannot find what you are looking for our Free Headwall Design Service can help.

    More information