Circular HDPE flap valves are recommended for use in emergency situations to protect against and prevent flooding during periods of extreme weather. Our circular flap valves are usually installed above the normal water level to prevent back flow up a pipe during times of heavy rain and flooding. The PTK-G flap valve is suitable for use with a water pressure of 5 MWC for 72 hours and 1 MWC for 50 years. Althon circular flap valves are HDPE with HDPE ribs and can be further reinforced where necessary with stainless steel.
Materials: HDPE, SS316, EPDM
The flap valve is HDPE with HDPE ribs and can be further reinforced where necessary with stainless steel
Unit weight: 225Kg
Max load from bottom invert level (B.I.L): 2.8 MWC long period (50 years)
5 MWC short period (72 hours)
Number of chemical anchors M8: 32 pieces
The valve plate and the back plate are manufactured in HDPE. The hinge pin and ballast weight are manufactured in SS316 as standard. The ballast weight can be easily adjusted if required. The sealing arrangement consists of an EPDM lips seal in the back plate. The valve plate is also installed on an angle in relation to the back plate to ensure a good seal.
Please note drawing is for visual purposes only and not to scale
All dimensions in millimetres