AH10C B LH Headwall

A one-piece reinforced concrete headwall to suit Plastic, Clayware or PCC Pipes up to 900mm I.D. Available with a standard backwall height of; 1.65m, with Lifting points cast in to each Wingwall for safe handling using Althon Lifting Clutches. A spreader bar is also recommended for safe handling. The chains are threaded through this eliminating side load on the vertical lift. Stainless steel sockets are provided for the attachment of Gratings and special brackets are available for use with the anchorage system. These headwalls allow pipework entering a watercourse at an angle to be accommodated or for an Outfall to be sited on a bend in a river.

 

Angled Headwalls (Left Hand) Max Pipe Opening (I.D) Plastic/C'ware Max Pipe Opening (I.D) PCC A mm B mm C mm Approx Weight (kg)
AH10CB LH No Toe 900 900 1650 800 995 2100 CAD & PDF Details
AH10CB LH 305mm Toe 900 900 1650 800 995 2345 CAD & PDF Details
AH10CB LH 610mm Toe 900 900 1650 800 995 2590 CAD & PDF Details
AH10CB LH 915mm Toe 900 900 1650 800 995 2838 CAD & PDF Details
AH10CB LH 1220mm Toe 900 900 1650 800 995 3080 CAD & PDF Details
AH10CB LH 1420mm Toe 900 900 1650 800 995 3245 CAD & PDF Details

Althon Headwalls offer a cost effective alternative to in-situ structures for connecting pipework discharging into open water courses.

All drainage pipes discharging into open watercourses, such as swales, ditches, ponds and rivers, should be fitted with an appropriate Althon headwall.

Sales Team: 01603 488700

Email: sales@althon.co.uk